You may be asked to insert your Windows installation disk.Ģ When the Connection Description window appears, enter any description (e.g., “test”) in the Name field, accept the default icon, and click Next.ģ On the Connect To window, enter any number (e.g., “123”) in the Area Code and Phone Number fields, select USB Modem from the Connect using drop-down menu, and click Next.ĥ On the white screen with a blinking cursor, type AT&F (even if the command characters are not echoed on screen) and press Enter. Select HyperTerminal and click OK, then Apply. Select Communications and click the Details button. (or Settings → Control Panel ), open Add/Remove Programs, and click the Windows Setup tab. Note: If HyperTerminal is not installed on your computer, from the Start menu, go to Control Panel Loading the Firmware Files Using HyperTerminalġ From the Start menu, select All Programs (or Programs ) → Accessories → Communications → HyperTerminal and open the HyperTerminal (or Hypertrm.exe ) application. Windows Vista users will need to use a third-party terminal emulation program, such as the freeware TeraTerm Pro Web by Ayera Technologies ( ). The driver installation automatically configures the port settings. Refer to the modem’s Quick Start or User Guide if necessary. These instructions assume you have installed the modem using the Zoom or Hayes drivers, depending on which modem model you have. The port settings in the program must be configured to a baud rate (port speed) between 9600 bps and hardware flow control (RTS/CTS) enabled.īelow are steps for loading the firmware files using HyperTerminal, which is included with Windows 95 through XP. These files must be loaded using a terminal emulation program that can communicate with modems/serial ports and transfer ASCII or text files.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |